Enter text for your title
- Select a title clip in the Final Cut Pro timeline.
- Move the playhead over the selected title clip.
- In the viewer, double-click the title text, then type text for your title.
- To select a different text object, do one of the following:
- Type new text as necessary.
- 1 Where is titles folder in Final Cut Pro?
- 2 How can I edit text in a video online?
- 3 How can I remove the title from a video?
- 4 4 Simple Ways to Add Text and Titles in Final Cut Pro X
- 5 How to Add Text in Final Cut Pro? (Easy, Step-by-Step)
- 6 How to Add Text in Final Cut Pro
- 7 How to Customize the Text
- 8 Additional Tips
- 9 Plugins
- 10 How to add text and titles in Final Cut Pro X
- 11 Keyboard shortcut to add titles
- 12 The basics: Adding basic titles to your clip
- 13 Add captions to my text in Final Cut Pro X
- 14 Next, use Final Cut Pro X’s “Installed Titles” generator
- 15 How to use Final Cut Pro X for beginners
- 16 How to add text in Final Cut Pro X
- 17 How to reverse a clip
- 18 How to stabilize a shot in Final Cut Pro X
- 19 How to add closed captions
- 20 How to cut your clips in Final Cut Pro X
- 21 How to create a freeze frame
- 22 How to sync audio in Final Cut Pro X
- 23 How to export in Final Cut Pro X
- 24 Handy keyboard shortcuts for Final Cut Pro X
- 25 Dive into our handy post-production tutorials.
- 26 How to Add Text over Video in Final Cut Pro
- 27 Steps
- 28 About This Article
- 29 Is this article up to date?
- 30 Add Titles to a Video in Final Cut Pro
- 31 Title Tips and Tricks for Final Cut Pro X
- 32 Conclusion
- 33 How to Add Text to Video with Final Cut Pro [2021 Updated]
- 34 4 Ways Add Text to Video with Final Cut Pro
- 35 Best Final Cut Pro Alternative to Add Text to Video – iMyFone Filme
- 36 Final Words
- 37 How to Add Text & Titles in Final Cut Pro X
- 38 Part 1: How to Add Text in Final Cut Pro X
- 38.1 Step 1: Prepare Your Timeline and Apply Basic Text
- 38.2 Step 2: Modify the Appearance of Your Text
- 38.3 Titles
- 38.4 Step 1: Select Your Title
- 38.5 Step 2: Modify Your Title’s Appearance
- 38.6 Lower Thirds
- 38.7 Step 1: Add a Basic Lower Third to Your Timeline
- 38.8 Step 2: Customize the Appearance of the Lower Third
- 38.9 Captions
- 38.10 Step 1: Add Captions to Your Timeline
- 38.11 Step 2: Modify the Captions
- 39 Part 2: Using Motion Array Text Templates in Final Cut Pro
Where is titles folder in Final Cut Pro?
In Final Cut Pro, do one of the following: Filter titles and generators: To show titles and generators in the browser, click the Titles and Generators button in the top-left corner of the Final Cut Pro window, or choose Window > Go To > Titles and Generators (or press Option-Command-1).
How can I edit text in a video online?
VEED is a free online video editor that lets you easily add text to your videos. You can add text, change its font, color, style, and more in just a few clicks. Simply upload a video and click on the ‘Text’ tool to start. Add a title, a regular text, or choose the handwriting font.
How can I remove the title from a video?
In Windows Explorer select all the video files you want to modify (you may want to do it in a few sets if you’re dealing with 1000’s of files). Right-click one of them and choose Properties. Slect the Details tab. Click the Remove Properties and Personal Information link.
4 Simple Ways to Add Text and Titles in Final Cut Pro X
Whether you’re an experienced editor or are just getting started with Final Cut Pro X, going over the fundamentals is always a good idea. Adding text or titles to your video and project sounds like it would be a piece of cake — and it really is! The UI, on the other hand, is not fully straightforward if you’ve never used the software before. Not only that, but there are a variety of alternative text and title options to choose from. So, let’s have a look at which ones you may utilize and how you can get to know about them.
1. Add Basic Titles
The Text Inspector is where you may customize the look of your title. Let’s just go right to the point of this discussion. To add titles to Final Cut Pro X projects, go to Edit Connect Title Basic Title > Add Title. Using this method, a title will be shown in the center of the clip currently chosen on the timeline. TheText Inspector will appear on the right side of the screen as soon as you click on the title to begin entering. This is where you may make minor changes to the font, size, position, alignment, spacing, tracking, and other minute specification elements, such as the color of the text.
FCPX simplifies the process considerably.
2. Use the Keyboard Shortcut for Titles
The Keyboard Shortcut is a quick and natural method to add a title to your document. Another extremely simple method of adding a title is to make advantage of the Keyboard Shortcut feature. To accomplish this, simply press Control – T(or T). This will automatically add a title clip to whichever clip is currently chosen on the timeline when this option is selected. After a while, you’ll begin to learn additional Final Cut Pro X keyboard shortcuts, and I guarantee that you’ll find yourself zipping through your edits without even realizing it.
3. Try the “Installed Titles” Generator
The “Installed Titles” generator provides you with the option of selecting from a pre-selected list of titles. In fact, when I first started editing in FCPX — after making the transfer from Premiere — I was completely lost as to where I should go to insert titles. Actually, that’s why I’m writing this essay – I couldn’t figure it out and needed help from others. I initially assumed it had something to do with the “Installed Titles” generator. Even if the symbol is quite impressive, it is not necessarily the fundamental titles that I had hoped for.
They can be a little lively at times, but just a little.
The location of the item is as follows: Make use of the “Basic Title” option in the titles generator that has been installed.
4. Add Captions to Your Video
Including subtitles in your video might assist in clarifying any ambiguous material. In FCPX, you may use captions to aid you when you want to add subtitles to your video or when there’s a tiny portion of conversation in your film or documentary that isn’t especially obvious. They’re also quite simple to insert! It’s as simple as going to Edit Captions Add Captions and pressing Option – C if you wish to utilize the keyboard shortcut. On the right-hand panel, you have the option of further customizing the caption text.
For anyone searching for some more fast tips on editing with Final Cut Pro X, I just published an instructional video on the NLE. Take a look over there! Are you looking for more FCPX content? Take a look at some of our earlier posts:
- Final Cut Pro X Editor Kits
- Final Cut Pro X Exporting Video
- Final Cut Pro X Editor Kits
- 5 of the Most Important Audio Editing Tutorials for Final Cut Pro X
- FCPX includes a number of advanced audio features. How to Create Slow Motion in Final Cut Pro X
- How to Create 3D Titles in Final Cut Pro X
How to Add Text in Final Cut Pro? (Easy, Step-by-Step)
This website is entirely financed by its readers. We rely on affiliate links to help us cover our expenditures. More information may be found here. (This page was last updated on December 14, 2021.) Do you want to know how to add text to a Final Cut Pro project? You have arrived to the correct location! You will learn how to add text to Final Cut Pro projects, as well as how to deal with templates and captions, in this guide. Continue reading to find out everything you need to know about text editing in Final Cut Pro.
How to Add Text in Final Cut Pro
Select EditConnect Title from the drop-down menu. Basic Title or Basic Lower Third are also acceptable options. Referred to as: Final Cut Pro vs Premiere Pro | The Ultimate Showdown (2021) Alternatively, you may use the commands “Ctrl + T” for Basic Title (only for Mac users; there is no Windows version of Final Cut Pro) and “Ctrl + Shift + T” for Basic Lower Third (only for Mac users; there is no Windows version of Final Cut Pro). I’m going to utilize the Basic Title for the sake of this lesson.
How to Customize the Text
To make changes to the text, choose the title in the timeline and click on it to highlight it. A white border will be drawn around the text clip to draw attention to it. Then, in the upper right panel, select the Text Inspector icon to open it. There are several options available to you in the Text Inspector to assist you in customizing the text.
- In order to update the text, either double-click it in the video panel or type your changes directly into a text box located in the text panel.
- Presets can be saved, with Format Attributes, Appearance Attributes, or all of these attributes saved as a preset
- Text Settings for 2D/3D Formats: There are also default text options for both 3D and 2D formats.
- Typesetting Settings: The Inspector provides access to all of the fundamental typesetting options, including font style, font weight, alignment and size
- It also includes a number of other options.
- It is possible to change the location, rotation, and scale of the image
- The 3D text feature in Final Cut Pro allows users a great deal of customizability. It is possible to select the light source from eleven distinct possibilities using the Lighting Style feature. You have the ability to vary the strength of the light, manipulate the environment, and change the substance of the writing
- Face: The face serves as the text’s filling material. It can be filled with a solid color, a gradient, or a texture. You may also modify the color of the font, tweak the opacity, and blur the letters
- It is possible to create an outline for a piece of text and customize the fill color, the opacity (opacity), the blur, and the width of the outline.
- Add a glow to the text by filling it with color or a gradient, altering the opacity of the fill, blurring the text, and modifying the radius of the glow
- Drop Shadow: You may use a color or a gradient to fill the drop shadow, and you can change the opacity, blur, distance, and angle of the shadow.
To access the templates, navigate to the Titles and Generators section of the sidebar. This sidebar will provide a variety of templates for you to choose from. To include a template in your timeline, just double-click it or drag it to the appropriate location on the timeline. A wide variety of layouts are available, ranging from static text to dynamic images, with several possibilities to pick from.
- Select the Titles and Generators sidebar from the drop-down menu to view the templates. You may choose from a variety of templates in this sidebar. Add a template to your timeline by double clicking on it or dragging it to the appropriate location on the timeline. A wide variety of layouts are available, ranging from static text to dynamic graphics, with several possibilities to select from.
- Use the blade tool to cut through the wood. Either choose it from the drop-down menu or press the letter “B.” Then, with your mouse, point to the location where you want to divide the clip. It’s possible to make it more accurate by nudging the playhead to the exact spot you want, hovering the blade until the color changes from red to black, and then cutting
- One further method of splitting a clip is to drag your playhead to the appropriate location and then press “Command + B” to split the clip OR “Command + Shift + B” to divide all of the clips at that moment.
Keyframes are required in Final Cut Pro in order to incorporate animation. To include them, please do the following:
- “Control + V” or ClipShow Video Animation are used to choose a clip in the timeline and play it. For the keyframes to appear, the Video Animation editor must be activated. Once activated, the clip will extend vertically, displaying all of the parameters. Some effects have more parameters than others, and some are more complex than others. You may either add a keyframe to a single parameter or add a keyframe to all of them.
- Adding keyframes may be done either using the Video Inspector or directly in the timeline. By pressing “Option + K,” you may place a keyframe in the location where your mouse is now located. Another option is to use the keyframe button in the Video Inspector, which will place a keyframe where your playhead is now located.
To automatically add keyframes to a chosen region, follow these steps:
- Choose a clip from the timeline and play the video animation that is associated with it
- Choose one of the criteria and then click on the disclosure button to see it in further detail.
- Select the range tool or the select tool from the toolbar. (Use the “R” or “A” keys to navigate.)
- Then, by adjusting the effect’s range by moving it up or down, you may fine-tune the effect. Keyframes will be created automatically in the surrounding region
- To reposition the keyframes, select them in the timeline and drag them right and left as needed. To erase keyframes, select them and press the delete key. To turn off the video animator, choose ClipHide Video Animation from the menu bar or press “Control + V.”
Adding subtitles in Final Cut Pro is a straightforward process. Use the keyboard shortcut “Option + C” or go to EditCaptionsAdd Captions to insert captions.
- Change the caption format, which you may do by selecting from the iTT, CEA-608, or SRT options.
- Language: You have the option of selecting the language for the captions.
- Caption Text: You can enter the caption text directly in the timeline or in a box in the Caption Inspector
- However, it is preferable to enter it in the Caption Inspector.
- Display: You have the option of saving caption styles as a preset, resetting them to their defaults, or applying another style.
- Formatting options include underlining, italicizing, and bolding the captions.
- Placement: You have the option of doing high captions or low captions depending on your preference.
- Choosing where to place your captions: You have the option of having high or low captions
Additional suggestions for creating captions include:
- Make use of a transcribing service to complete the task. Using a transcription service will save you a significant amount of time, allowing you to focus on fixing errors rather than writing everything down. Uploading the movie as a private video to YouTube and automatically creating subtitles, resulting in the creation of an.srt file, is one method of hacking the system. Download this file and use it as a starting point
- You may change the captions to be in other languages. While Final Cut Pro will not translate for you, the program will retain the time-codes for you
- You can also import captions rather than having to create them from scratch, which saves you time. You may also import a.srt file into the program. To accomplish this, follow these steps:
- Navigate to FileImportCaption and choose your.srt file to import. Last but not least, Final Cut Pro will process the.srt file and layout all of your captions.
- Captions will not be included in a typical export of the document. To include the following captions:
- Export in the normal way, using “Command + E” to bring up the export dialogue box. When the Master File appears, select the Roles tab from the menu bar.
- The export dialogue is accessed by pressing “Command + E” on the keyboard. The Roles tab will appear when you open the Master File after it has been opened
- As of now, the subtitles will be included in the video that is exported
From this point forth, all captions will appear on the output video.
How to add text and titles in Final Cut Pro X
The process of adding text in Final Cut Pro X: Final Cut Pro X is increasingly becoming the editing program of choice for all filmmakers. There are a variety of methods for enhancing the value of your video, and one of them is by including text in your footage. Adding titles to your videos is a straightforward operation; nevertheless, it is not always as simple or obvious as you would want or expect. Throughout this tutorial, we’ll go through the numerous techniques of adding text to your clips in Final Cut Pro X.
Keyboard shortcut to add titles
When it comes to adding text and titles to your video files, keyboard shortcuts are one of the most effective methods.
To do this, simply press Control-T on your keyboard. This will bring up the title editor, where you may make changes to your video clip. This shortcut will significantly reduce the amount of time you spend editing.
The basics: Adding basic titles to your clip
The quickest and most straightforward method of adding titles or text to your video clip is to navigate directly toEditConnect TitleBasic Title. When you do this, a text-based title will be shown in the clip you are now viewing on your timeline. Whenever you click on the title, theText Inspector will appear, allowing you to make changes to the text such as changing the font size, aligning the text, tracking the text, and adding any other effects you like.
It may be necessary for you to add subtitles to your film at times, but with Final Cut Pro X, you won’t have to worry about it. Here’s how to include subtitles in your video: All you have to do is navigate to EditCaptionsAdd Captionsor, if you prefer, use the Control + C keyboard shortcut to reach this. You may now edit the text in the right-hand panel to make it more appropriate for your video clip and to make it more consistent with the design.
Next, use Final Cut Pro X’s “Installed Titles” generator
Finally, you have the option of suing the titles that have already been loaded in Final Cut Pro. These are simple to operate, smooth, and the effects are of the greatest caliber available on the market. They are particularly useful since it can take a long time to design moving titles, mask them appropriately, and have the tracking set up correctly. It is possible to save significant time by employing pre-built titles and title moves, and Final Cut Pro X does not let you down in this regard! Adding titles, text, and subtitles to your film or video clips may be quite important in terms of adding value to your work.
We hope this has been of use to you with your modification.
Become a member of Filmstro and follow us onTwitter, Facebook, and our YouTube channel.
How to use Final Cut Pro X for beginners
When digital video editing was first becoming popular, there was a historic struggle between two great tribes: Adobe Premiere and Apple Final Cut. And, when the dust settled, Premiere looked to have emerged triumphant, as it quickly rose to become the industry standard for professional video editing and production. Instead of disappearing, Apple relaunched its flagship non-linear editing (NLE)app as Final Cut Pro X, and the software has quietly continued to serve as a dependable and accessible video editing platform that is every bit as deserving and capable as its probably more popular cousin.
For those new to Final Cut Pro X, as well as those wondering about what this industry behemoth has to offer in the field of video editing, here is your helpful tutorial.
How to add text in Final Cut Pro X
Including text in your video may significantly increase its professional value. Lower thirds, titles, and end credits are all important elements of your tale since they provide essential context.
Furthermore, they are rather simple to add into post-production; you can complete the process entirely within Final Cut Pro X. (FCPX). We’ll take you step-by-step through the procedure in this guide. Let’s get this party started.
How to place your text
- Move the playhead to the location where you want your text to appear
- Navigate to the Titles and Generators section of the sidebar. If it is not already visible, choose WindowGo ToTitlesorGenerators from the drop-down menu. This will allow you to access the panel
- Premade titles, lower thirds, credits, and other elements will appear next. To get started, choose one of the presets or create your own. Scanning over the thumbnail of the prepared titles will allow you to see a preview of the artwork. Insert it into your timeline by double-clicking on it. Then, by tugging on the clip itself, you may alter the length.
How to customize your text
Follow the steps 1-4 above, and then do the following:
- Double-clicking on a text clip in your plot will bring up the Text Inspector panel for editing. In this section, you may customize the appearance of the text, including its color and basic effects such as glows and drop shadows.
Advice: None of the alternatives offered will alter the method in which text animates, so bear this in mind when making your first text selection. Pro-tip: If you want comprehensive customization of your title, including all of its effects, the Custom title is the best option. You’ll find it tucked away in one of the prepared titles.
How to put it all together
- Insert the title into your sequence at this point. Double-click theCustom title option to make it active. To personalize your sequence, double-click on the title in the sequence. Finally, if you like, you may include effects and transitions. For example, to add a crossfade to a clip in the plot, click the border of the clip. Select EditAddCross Dissolve (or press Command-T) from the drop-down menu.
You may create your title designs in other applications (like as Adobe Illustrator) and then import them into your piece if your title design requirements exceed the capabilities of FCPX.
How to reverse a clip
When you reverse a video clip, the final frame plays first and the first frame plays last, resulting in the first frame playing first and the last frame playing last. The need to reverse a clip in your project might arise for any number of different reasons. In this tutorial, we will show you how to accomplish this task in Final Cut Pro X. When used in conjunction with a moving object, this function can replicate a rewind effect or change the direction of a moving object, such as reversing a sunset if you were too lazy to get up at 5 a.m to watch the dawn.
Let’s get this party started.
- You may reverse a clip or many clips in your Timeline by selecting them and pressing the Reverse button. Select the Reset button at this point. It has the appearance of a little stopwatch
- Now click onReverseclip. It will be reversed when you see a green bar with little arrows going to the left above your clip
- Otherwise, it will not be reversed.
Optional: You can change the pace of your clip. Grab the retiming lever at the border of the colored bar if you want to speed up or slow down your reverse effect to suit your needs. Moving it to the right increases the speed, while moving it to the left reduces it.
How to stabilize a shot in Final Cut Pro X
So you drank a little too much coffee, and your handheld photos are a little unsteady as a result. Do not be alarmed. You may still use post-processing to stabilize your photo. Final Cut Pro X includes an image stabilization option that may be used to smooth out any undesirable shakiness in your footage. An added bonus is that it is really simple to use. Let’s get this party started.
How to stabilize your shot
- In your timeline, drag the clip that you wish to stabilize into place. You can only stabilize a complete clip at a time
- You cannot stabilize a section of an entire clip. As a result, you’ll need to utilize theBlade tool to precisely cut the section of the image you wish to stabilize. Select theInspectorbutton from the drop-down menu. If you don’t see it, press the number 4 key on your keyboard. To open the Videobutton on the Inspectorwindow, click on it. After that, choose the checkbox next to Stabilizatio n. Once the automatic parameters have been applied, Final Cut Pro X will begin stabilizing the film. It’s a good robot
Now, if you’re satisfied with the outcome, you’re finished. You may also make more adjustments to your settings. Show will appear when you click on it (next to Stabilization). From here, you may fine-tune the stabilization of your video to suit your preferences. If you raise the sliders to their highest positions, it will make the stabilization correction more harsh. The smooth slider for translation has an effect on the movement of the x and y axes (left, right, up, down). The smooth slider for rotation has an effect on rotation around the center point.
As we move forward, another fantastic feature featured in Final Cut Pro X is the ability to quickly and simply add closed captioning or subtitles to any film. In general, if you haven’t thought about implementing closed captions for your movies yet, you should really consider it now. Not only do closed captions assist the deaf and hard of hearing, but they can also significantly improve a video’s ability to perform well online – as well as provide subtitle options for films or other projects that will be screened in front of audiences who speak a different language than the one in which the video was produced.
The following are the fundamental actions to take in order to add closed captions:
- As we move forward, another fantastic feature included in Final Cut Pro X is the ability to quickly and simply add closed captioning and subtitles to any film. If you haven’t explored implementing closed captions for your videos yet, you should seriously consider doing so. Closing captions are not only beneficial to the deaf and hard of hearing, but they can also significantly improve a video’s ability to perform well online. They can also be used to provide subtitle options for films or other projects that will be shown in front of audiences who speak a different language than their own. For those unfamiliar with closed captioning, these are the fundamental procedures to be aware of.
Simply hit the keys Option+C (or Control+Option + C if the Caption Editor is currently active) to start the Caption Editor. After you’ve contributed a caption, you may utilize the Caption Editor to add any additional text that you want to it. You may also make additional changes to the way and when the text appears on the screen for your project if you so want. H2 What is the best way to combine clips in Final Cut Pro X? If you are working on Final Cut Pro X, another useful tip to keep in mind is the ability to swiftly and simply merge or join clips together.
In Final Cut Pro X, the following are the fundamental stages for merging clips together:
- Identify the clips that you’d want to combine (make sure they’re next to one another)
- Clips may be joined together by clicking TrimJoin Clips.
You may also opt to make a Compound Clip by selecting numerous clips (even if they are not nearby) and selecting “New Compound Clip” from the context menu. You may also simply hit the Option+Gas key combination.
How to cut your clips in Final Cut Pro X
If you want to eliminate footage from a video clip in Final Cut Pro X but don’t want to change the time of the clip, the Blade tool comes in useful no matter which way you slice it. This tool allows you to eliminate video from your clip that you don’t want to utilize and to change the time of your clip as well. The way it works is as follows. Instructions on how to trim your video clip
- Make a copy of your selected clip and paste it into your timeline
- Select the Blade tool from the tools menu in the top left corner of the timeline by clicking on it. To make things simpler, simply press the B key on your keyboard. Make a pass with your skimmer over the area where you wish to cut and then click
That’s all there is to it! It’s simply that straightforward. As a result, there is a little more capability incorporated into the Blade tool, and the following are a few of useful hints. Tips and tricks for getting the most out of the Blade tool If you only want to make a quick cut and don’t want to use the Blade tool for a long period of time, hit and hold the B key while executing the cut. The tool will go back to the one you were using before you made the cut when you complete the cut. 2. If you have numerous audio and video tracks stacked on top of one other, you may cut them all at the same time by dragging your skimmer to the spot where you wish to cut and pressing Shift-Command B on your keyboard.
If you wish to reverse a cut you’ve done, pick the two clips you want to combine into one and then click TrimJoin Clips from the Edit menu.
How to create a freeze frame
Using a freeze frame, you may keep your chosen clip in place and stop any movement in your video, just like you would with a snapshot. The usage of this approach can be justified for a variety of reasons, including to accentuate a jump or high five, or to halt the action in order to insert some more narrative. The good news is that It’s quite simple to complete.
- Navigate to the frame you wish to freeze with your playhead. Select EditAddFreeze Frame from the drop-down menu. You may also use the shortcut Option-F to go to the menu.
That’s all there is to it! Seriously, you’ve reached the end of your rope.
One more point to mention: the default duration for your new, still clip is four seconds, but you may change it if you choose. Final Cut ProPreferencesEditing may be accessed from the menu bar. Then, using the “still picture duration” choice, you may alter the length of the freeze period.
How to sync audio in Final Cut Pro X
If you’ve ever been on a video shoot and captured footage with many cameras (or even added in a channel or two of audio from a separate audio recorder), you’ll be familiar with the difficulties of trying to sync so much audio and video together. Making sure that all of the different files and wavelengths are in sync may be a frustrating and time-consuming process. And, while Premiere Pro has various features and third-party choices for synchronizing audio with video, Final Cut Pro has consistently outperformed its competitor in this area.
Simply follow along with the video and the basic procedures outlined below to ensure that your audio and video are exactly in synch.
- Select all of the audio and video clips you wish to sync in the FCPX browser
- Then click OK. ChooseClipSynchronizeclips from the menu bar at the top of the screen. A window will appear, and it is here that you will configure the sync. Fill in the blanks with a name for your freshly synchronised clip and select the option to use audio for synchronization. Advice from the experts: If you wish to remove your reference audio from the video track, just tick the box labeled Disable audio components on AV clips and then click OK. Now it’s time to sit back and let the FCPX work its magic. Final Cut Pro will create a synchronised clip with the name you set previously after the synchronization process is complete. To finish, just drag the freshly produced clip into your timeline using your mouse.
How to export in Final Cut Pro X
One of the most often requested instructions is on how to export video files from Final Cut Pro X (FCPX). This is due to the fact that it is, in many respects, the final stage of post-production. It is necessary to export your video file from your editing program to the appropriate viewing platform if you wish for the entire world to be able to witness your fantastic new film. Despite the fact that exporting video files from Final Cut Pro X is a straightforward process, people are always looking for information on how to do it.
As a result, throw out the word “export.” The following tutorial will teach you the basics of sharing video from Final Cut Pro X.
- One of the most often requested instructions is how to export video files from Final Cut Pro X (FCPX). This is due to the fact that it is, in many respects, the concluding stage of the postproduction process. It is necessary to export your video file from your editing program to the appropriate viewing platform if you wish for the entire world to witness your wonderful new film. People are always looking for information on how to export video files from Final Cut Pro X, despite the fact that it is a rather straightforward process. Final Cut Pro X has followed in the footsteps of iMovie and modified Export to Share mode. Don’t think about it anymore in terms of “export.” Today we’ll cover the process of sharing your Final Cut Pro X movie with other people. Watch the on-screen video guide above, or continue reading for the step-by-step instructions.
Bonus: You can upload straight to Vimeo (in just three simple steps!) as well. There are a variety of different choices for distributing your video. Vimeo is another option for distributing your work straight to the public. Be advised that when you share straight to any platform, no file will be stored on your PC. However, if you want to submit a preliminary cut fast and avoid loading up your computer with a dozen incomplete versions, this is the method to use instead.
- You’ll find the option to share directly to Vimeo under FileShare
- If you want to share via email, you’ll find the option under Email. Assign a title and a brief explanation to your video. You have the option of selecting your settings. Check your privacy settings and make any necessary adjustments if you want them to remain private. To proceed, you’ll be asked to sign in to your Vimeo account and agree to our terms of service, so make sure the video is yours to share before continuing.
It is possible to receive an alert in Final Cut Pro X when your film has been successfully uploaded to Vimeo if you have notifications enabled in the program.
Handy keyboard shortcuts for Final Cut Pro X
Finally, as is the case with the majority of video editing software and applications, keyboard shortcuts are essential if you want to significantly increase the speed and output of your editing process and projects. Final Cut Pro X is no exception, and in fact, it has some of the most advanced, yet simple to memorize, shortcuts of all of the NLE platforms available today. Here are a few of our favorite FCPX shortcuts to help you get more work done faster in your editing sessions.
- Create a New Project: N
- Import Media: I
- Export/Share Project: E
- Create a New Project: N
- Snapping may be turned on or off by pressing N. Using the Space Bar, you may play the Timeline. Skim the Timeline by holding down the S key and moving the pointer
- Undo Last Action: Z
- Redo Last Action: Z
- Zoom In: =
- Zoom Out: –
- Undo Last Action: Z
- Mark In Point: I
- Mark Out Point: O
- Mark In Point: I
- Add Title: t
- Add Lower Third: t
Those are just a few of our favorites; you can find a whole list of Final Cut Pro X keyboard shortcuts on the official Apple website, which you can access by clicking here. That’s all there is to it. Final Cut Pro X, from Apple, is a viable competitor to Adobe’s Premiere Pro in many ways (as well as any other NLE platforms for that matter). Beginners and those who are just getting started in video editing should keep in mind that the most important thing for them to consider at this stage is familiarity and comfort rather than functionality.
The Final Cut Pro X software is also one of the most accessible and simple to learn of its kind, so you should anticipate to be up and running in a matter of days rather than weeks or months after purchasing it.
Extra video editing resources are available if you want to further enhance your abilities and learn some additional NLE editing methods and techniques. These include:
- Trying to figure out what the finest video editing software will be in 2021? Begin with this
- Video editing fundamentals: Here are six fundamental guidelines that every newcomer should be aware of: Make a note of this professional’s guide to Adobe Premiere Pro in your favorites. Not sure where to begin with After Effects? Begin with this
Dive into our handy post-production tutorials.
Ashley Maas and Mark Cersosimo wrote the original draft of this article. Jourdan Aldredge made the most recent update in 2021.
How to Add Text over Video in Final Cut Pro
Documentation Download Documentation Download Documentation Final Cut Pro is a video editing software product developed and supported by Apple that allows users to create and edit videos. Any video may have text added to it using Final Cut Pro, which is referred to as a title. Transparent text can appear in your films in the form of subtitles, opening and closing credits, and information about key events or places inside the video, such as dates, timings, and locations. Continue reading to discover how to add text to your films in Final Cut Pro using the text overlay feature.
- 1Start the Final Cut Pro software application on your PC. Final Cut Pro’s Project Library may be accessed by clicking on the symbol of a film reel, which can be found in the bottom-left corner of the application. 3) Double-click on the project name to bring up the project window where you wish to insert content
- 4 In your project’s Bin, select the “Effects” tab from the drop-down menu.
- Final Cut Pro’s Bin is a square region with a gray background that may be found in the upper-left corner of your workspace.
- 5Click on the “Video Generators” folder to open it in a new window and see more possibilities
- Open the “Text” folder by selecting it from the drop-down menu
- 7 Select “Text” from the drop-down menu and drag it to the vacant space in your Sequence (found within your Timeline) where you wish to insert text
- It is found at the very bottom of your Final Cut Pro session, near the bottom of the screen. A Sequence is a segment of time in your video that is contained within the Timeline. Adding a new Sequence to your Timeline for text may be accomplished by selecting “File” in the top toolbar of your Final Cut Pro session, then “New,” and then “Sequence.”
- 8 Double-click on the Text block that has now appeared in your Sequence to bring it into view.
- It is necessary to follow this technique in order to obtain an expanded preview of your Text and insert it in the Viewer window. The Viewer window is positioned in the top-middle portion of your Final Cut Pro session
- It may be accessed by pressing the View button.
- 9Click on the “Controls” tab in the Viewer window to bring up the control panel, which will allow you to edit and write the text for your video
- 10Click on the “Controls” tab in the Viewer window to bring up the control panel
- 11Click on the “Controls” tab in the Viewer window to bring up the control panel
- 12Click on the “Controls” tab in the Viewer window to bring up the control panel
- 13Click on the “Controls” tab in 10 Then, in the empty box to the right of the “Text” area, type the text that you want to appear in this particular segment, or Sequence, of your movie.
- Text control panel also allows you to customize other aspects of the text, such as the font type, font size, font color, and text alignment.
- 11 Run a preview of your text by clicking at a location outside of the control panel.
- Your work will be shown in the Viewer window as a result of this procedure. If you wish to make changes to the look of your text, return to the control panel section. You can also preview your text in the Canvas window by clicking and dragging the Playhead to the text position in the Sequence. When you play your video, the Playhead is represented by a yellow, upside-down triangle in your Sequence, which advances down the Timeline. Located just to the right of your Viewer window, the Canvas window displays your current canvas.
- 12 Move the Text block to the layer exactly above your video clip so that when the video plays, your text will display within the movie.
- Navigate to the video area of your Sequence and start recording. To put the Text block above your video in the Sequence, click and drag it to the desired location.
- Alternatively, you may save your video project by selecting “File” from the toolbar of Final Cut Pro and then selecting “Save Project.”
Create a new question
- Question Is Final Cut Pro accessible for use on a Windows-based computer? Suraj ShethAnswer from the Community For the time being, Final Cut Pro is not available for Windows computers. Final Cut Pro is only available for PCs that are made by Apple. Sony Vegas and Adobe Premiere Pro are two excellent video editing applications available for Windows PCs that you should investigate.
Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. Submit Thank you for submitting a suggestion for consideration!
About This Article
The writers of this page have together authored a page that has been read 180,384 times.
Is this article up to date?
Adding text to your Final Cut video productions is made possible through the use of titles. For example, the title of a video, the location of a scene, the role of an interviewee, or the source of archive material might all be included under this category. All of them are variations on the same title, which is present in Final Cut Pro X as well.
Add Titles to a Video in Final Cut Pro
Adding text to your Final Cut video productions is made possible through the use of title frames. For example, the title of a film, the location of a scene, the role of an interviewee, or the source of historical material might all be examples of this. Essentially, all of them are variations on the same title that appears in Final Cut Pro X.
Adding the Title
Click the “TitlesGenerators” sidebar button in the Library window, which is located in the upper-left corner. This exposes all of the different title settings that are available in Final Cut Pro. As a matter of education, we shall begin with a simple title and work our way up to something more meaningful. Insert the “Basic Title” into your timeline by selecting it from the drop-down menu. You may either drag the title into the timeline or double-click on it to place it at the playhead of the video.
If it is highlighted in yellow, you will know it has been picked.
Editing the Title
If the Inspector pane is hidden, you may expose it by clicking the slider button on the Inspector’s toolbar. You could instinctively choose the Title Inspector icon from among the various inspector windows that are accessible, but this will not assist you. These pre-built titles make use of this pane to reveal key parameters to the user, allowing for quicker user configuration. To edit our titles, choose the “Text Inspector” icon from the Inspector toolbar, which is close to it. To input the content of the title, choose the content of the “Text” textbox and replace it with the material of your choosing.
The typeface, text size, and other text parameters can be selected in the “Basic” part of the next page.
You may either double-click on the section’s name to expose it, or hover your mouse to the left of the undo arrow and select “Show,” if it has been hidden. The “Face” area is where you may modify the color of the text. This determines how the title appears on the front, or face, of the screen.
Title Tips and Tricks for Final Cut Pro X
- We may make changes to the content and look of our text by using the Text Inspector window. We can apply styles fast by utilizing the built-in presets. To fade a title in and out, use the Transitions Browser like any other clip. To show the Transitions Browser, click on the icon to the right of the title clip in the timeline and drag the appropriate transition onto it. Three-dimensional settings are available in the 3D Text area of the Text Generator Inspector panel, which is accessible through the Text Generator Inspector panel. Once you have enabled 3D Text, you will be able to alter the full appearance of your title from that area. The check boxes in the Inspector pane may be used to rapidly enable and disable options in the Inspector pane. The undo and redo arrows return sections to their default settings. In most cases, titles should not be placed at the bottom of the image. On earlier televisions, titles towards the edge of the frame would be cropped by the television because of the picture’s aspect ratio. Fortunately, this is no longer a concern, although aesthetic tradition mandates that big titles be shown in the middle of the screen. Unless you have a compelling creative reason to depart from them, adhere to these guidelines.
We may make changes to the content and appearance of our text by using the Text Inspector tab in Photoshop. We can apply styles fast by using the built-in presets. To fade in and out a title, use the Transitions Browser in the same way you would any other clip. To show the Transitions Browser, click on the icon to the right of the title clip in the timeline and drag the appropriate transition to it. When you are in the Text Generator Inspector panel, you may access three-dimensional text settings through the 3D Text section.
The check boxes in the Inspector window may be used to rapidly enable and disable settings.
In most cases, titles should not be placed at the conclusion of a picture.
Fortunately, this is no longer a concern, although aesthetic tradition mandates that big titles be shown in the middle of the screen.
How to Add Text to Video with Final Cut Pro [2021 Updated]
Text is frequently required by video content makers to be included in their videos. It helps to make the video more understandable and visually appealing. Text in films is used for a variety of purposes, including providing subtitles, descriptions, names, titles, and translations, among others. We are all familiar with the appearance of text in videos, and we may have pondered how it was accomplished. Adding text to a movie with Final Cut Pro X is the topic of today’s lesson! We will walk you through the process of adding basic and dynamic text to your video in a variety of ways.
4 Ways Add Text to Video with Final Cut Pro
Text is frequently required by video content makers for their videos. It helps to make the video more understandable and visually appealing to the viewer. Adding captions, explanations, names, titles, and translations to films are just a few of the numerous things that text may do in videos. Most of us have probably noticed text in videos and wondered how it was accomplished. Today, we’ll go through how to insert text into a movie using Final Cut Pro X. We will walk you through the process of adding basic and dynamic text to your video in a variety of formats.
Method 1: Common Steps to Follow in All Methods
Step 1: Launch Final Cut Pro X on your computer. Step 2: If there are any libraries that are currently open, it is preferable to shut them. On the left-hand side of the window, select the library option. Navigate to theFilemenu and selectClose Library “Name of the Library” from the drop-down menu. Step 3: Go to theFilemenu, hover over New, and choose Library from the drop-down menu. Save the library by entering the name of the library in the Save box. Step 4: Select Project from the Filemenu by hovering over it and clicking on it.
Step 5: Navigate to theFilemenu and selectImport Media from the drop-down menu.
Step 6: The video will be available for viewing in the library.
Method 1, Method 2, or Method 3 should be followed in the seventh step. Click on theExportbutton located at the upper right corner of the window in step eight. Select Master File from the drop-down menu. Choose the settings that you want and then export the video.
Method 2: Using Edit Menu
This is the quickest and most straightforward method of putting simple text into a movie. Step 7: Make a list of all of the things you want to do. Navigate to the Editmenu. Hover over Connect Title and choose BasicTitle from the drop-down menu. The timeline will now have a title, thanks to this action. Click on the title in the timeline and then on the Text Inspector in the Inspector Panel to bring up the Text Inspector. On the right-hand side of the screen, you will see editing choices. You may change the wording, the color, or anything else you wish.
Method 3: Using Title Menu
Go to the Titlemenu in the upper left corner of the window to complete Step 7. You’ll notice things like titles and generators. Select a title from the drop-down menu that appears. You are free to choose any of them. For the time being, check for Basic Title. You may look for it by typing its name into the search field. Drag the title to the timeline to make it appear. To alter the text, click on the title in the timeline and select Text Inspector from the drop-down menu.
Method 4: Using Captions
Step 7:Move the Playhead to the location where you want the subtitles to appear. Add captions by going to theEditmenu, hovering over theCaptions, and clicking onAdd Captions. The caption will be included in the chronology of events. There will be a text editor available underneath it. You have the option of entering whatever text you like. Adjust the duration of the title by dragging the ends of the title on the timeline.
Also Read:How to Add Sound Effect to Video with Final Cut Pro
Videos that are animated are more appealing. In order to make the video more entertaining, it is preferable to employ animated text. You can quickly create animated Text in Final Cut Pro in a few steps. Step 1:Open Final Cut Pro. Select the library if there is any and go to theFilemenu and close the library. Step 2: Navigate to theFile New Library menu option. Save the library by giving it a name and clicking on Save. Navigate to theFile New Project menu option. Click on “OK” once you’ve entered the name.
- Drag the video to the timeline to make it appear.
- Search for theCustomand drag it to the timeline.
- You have the ability to choose the color, font, and size, among other things.
- The ” T ” symbol, which may be found on the left side of the Text Inspector.
- For example, you may set the opacity to 0 percent.
- Open the In Location Settings window if you want to change the position of the text in the video.
- In a similar vein, you may alter the speed, blur, size, rotation, duration, and a variety of other settings.
- Navigate to theEffectstab on the right-side toolbar above the timeline to begin working with it.
- There is also a setting for effects.
- Take a look at the preview of the text after it has been enhanced with the effect.
In order to change the length of the text, you must first shift the title’s beginning and ending points in the timeline. To export the file, click on theExportbutton in the upper right corner of the screen when you have finished.
Also Read:How to Add Video Transitions in Final Cut Pro
Text may be easily moved and adjusted in Final Cut Pro X thanks to the text tool. It is simply necessary to follow a few simple steps. Step 1: Select the text on the timeline by clicking on it. Step 2: Make any necessary changes in the Text Inspector. Each and every modification option is contained within the Text Inspector. Fill in the blanks with the wording you like. You have complete control over the color, alignment, font, opacity, blur, size, and line spacing, among other things. All that is required is that you choose the desired value.
- ThePositionin the Inspector may be used to make text modifications.
- Dragging the text around is the quickest and most convenient method of moving it.
- Alternatively, you may access the Viewmenu and selectShow Title/Action Safe Zone from there if you want more exact movement when dragging the text.
- Step 4: When you are finished, have a look at the preview.
Best Final Cut Pro Alternative to Add Text to Video – iMyFone Filme
Despite the fact that Final Cut Pro contains several text options, it is not user-friendly enough for beginners. You’ll need time to study and experiment with new things. MyFone Filme, on the other hand, is a breeze to use. You may easily include text in your movies without having to worry about formatting.
- Filme is an extremely user-friendly piece of software. It is an excellent choice for novices. There are several other text styles that you may use for the title, subtitle, and captions
- However, the most common is bold. You may easily change the text and move it anywhere on the canvas that you want it to be. It saves you valuable time. Filme provides all of the fundamental editing functions, including cropping, speed modification, and rotation. Effects, transitions, animations, and multi-layering are just a few of the complex editing features you may employ with it.
Try It For FreeTry It For FreeGet a FREE 1-Month License (Limited Time)
How to Add Text Using Filme
Step 1: Launch the Filme application. Navigate to theFile New Project menu and select the appropriate screen size. Step 2: Select Import Import Files from the File menu. Choose the video in which you wish to include text by clicking on it. Step 3: The video will be saved to your My Media folder. Drag it to the timeline to make it appear. Step 4: Navigate to theText at the top left corner of the screen. There will be a variety of text styles to choose from. Move the Playhead to the location where you wish to insert the text.
Step 5: In the timeline, double-click on the title of the video.
Text may be edited and all types of alterations can be made, including alignment, position, opacity, font, color, and size.
Step 6: In the timeline, you may specify how long the text should be shown.
Drag and drop the text in the canvas to move it around to the location of your choosing. Step 7: When you are finished, go to the export menu and select Video Export from the drop-down menu. Alternatively, you may watch this video lesson to learn how to add text to video using the Filme application.
Text must be included in your videos in order for them to be more visually appealing and self-explanatory. There are other methods and tools for adding text to films, but we have focused on Final Cut Pro X in this article. For your convenience, the step-by-step procedure is described. Final Cut Pro X is a complicated piece of software to use. In order to add text to your video, Filme is the ideal option if you are seeking for an alternative to YouTube. When you use Filme, you may quickly add text to your movie.
How to Add Text & Titles in Final Cut Pro X
In order for your videos to be more visually appealing and self-explanatory, you must include text in each one. In order to include text in videos, there are a variety of methods and tools available. We have already covered Final Cut Pro X in depth. It is described in detail so that you can follow along. Final Cut Pro X may be a frustrating program to use. In order to add text to your video, Filme is the finest option if you are seeking for a similar alternative. Making text appear in your movie is simple when you use the Filme application.
Part 1: How to Add Text in Final Cut Pro X
When all you need is a plain title with no animation, use simply text instead. If you wish to follow in our footsteps, you may watch the freeOver the Foreststock video clip online.
Step 1: Prepare Your Timeline and Apply Basic Text
- Add a clip to your Timeline by clicking on it. Place your playhead over the beginning of the clip in the Timeline
- Then click on the clip to play it. To create a simple title, using the Control + T keyboard shortcut. The title is set to 10 seconds by default. Adjusting the length of your title may be accomplished in three distinct ways: Option + Rightbracket can be used to trim the title after it has been selected. – Select the title and then drag the playhead to where you wish the title to terminate. – Draw a line around the border of the title to indicate where you want it to come to an end. – If you want to make Basic Text that fits the duration of your video clip, first pick the video and then use the shortcutX to mark the clip, followed by Control + T to apply the text. In the Viewer, double-click on the text to rename it, and then click OK. In order to exit text entering mode, pressEscape. At this point, you can rearrange the text within the frame.
Step 2: Modify the Appearance of Your Text
- Now that the text has been selected, you may make changes to it using the Text Inspector. You may adjust the font, size, and alignment of the screen through this menu. Make advantage of theTracking and Kerning settings to improve the readability of your written work. Tracking alters the spacing between all of the letters, whereas Kerning alters the spacing between letter pairs in a sentence. In the example, you’ll see that the “T” and “e” don’t feel quite right, with the “T” having an overhand on it. Double-click on the text to enter text entry mode, and then drag the mouse between the letters “T” and “e” to complete the sentence. Now, gradually increase the amount of Kerning till it seems perfect
- Scroll down the Text Inspector until you see the panelFace that has been highlighted. You may modify the Fill, Color, Opacity, and Blur parameters in this section. Aside from that, you may generate 3D text and adjust the Outlines, Glow, and Drop Shadow by selecting the appropriate box for each panel.
Titles are often used for the show’s opening and closing titles, as well as for closing credits. Finally, Final Cut Pro has a vast variety of Title templates that are sorted into several categories.
Step 1: Select Your Title
- To examine all of the available backdrops, elements, solids, and other elements, navigate to theTitles and Generatorssidebar. You’ll note that they’re all sorted into categories such as 3D, 360°, Build In/Out, and a slew of others
- This is intentional. Double-clicking on a title will move it to the location in the timeline where your playhead is now located
When you want to add more attractive, dynamic text to your project, Titles are the way to go. A vast array of usefultemplates is available in Motion Array, which we shall study at further in part two!
Step 2: Modify Your Title’s Appearance
- Titles may be edited in the Text Inspector in a similar way to Basic Text
- In many cases, the Titles will contain numerous layers of text that can be adjusted. Layers may be selected and modified by using the Text Layerarrows.
Lower thirds are used to distinguish between different speakers in your video. They are frequently employed in news and documentary production. The general rule of thumb for how long a bottom third should be visible on the screen is that it should be possible to repeat the person’s name and title three times before it disappears.
Step 1: Add a Basic Lower Third to Your Timeline
- Placing the playhead at the beginning of the clip in the Timeline is a good idea. To add a Basic Lower Third, press Control + Shift + T at the same time.
Step 2: Customize the Appearance of the Lower Third
- In the Viewer, double-clicking on the name or description will allow you to modify that text in the Text Inspector
- In the Text Inspector, double-clicking on the name or description will allow you to change that text in the Text Inspector
- Text Layerarrows may be used to pick and alter layers, allowing you to customize the text for each line as desired. Outlines and Drop Shadows can help you improve the readability of your bottom thirds and text in general by making it more visible. Keep in mind that they function on a layer-by-layer basis, so you must turn them on for each layer.
Captions allow you to generate closed captions and subtitles for videos on the internet. Closed captions and subtitles are required by government authorities, broadcasters, and streaming providers, among other parties. Captions are also utilized for scrolling news articles with subtitles and teleprompters, among other things. iTT, CEA-608, and SRT are all supported by Final Cut Pro as well as the standard iTunes Timed Text (iTT).
Step 1: Add Captions to Your Timeline
- Place your playhead in the location where you want to apply the caption
- To add a caption to the timeline, press the keyboard shortcut Option + C.
Step 2: Modify the Captions
- Control + Shift + Callows you to make changes to a caption you’ve already written. You may also duplicate yourCaption and alter the language or format of the caption.
Part 2: Using Motion Array Text Templates in Final Cut Pro
In the event that you need to develop content rapidly under strict time constraints, Motion Array’sunlimited marketplacehas a vast variety of time-savingtext and title templates that you may use into your video productions.
Step 1: Download a Motion Array Template
- Choose your chosen template and click on the “download” button to get it. The first thing you’ll need to do is sign into your account. Each template includes a video instruction as well as a PDF that explains how to utilize the newly downloaded template. If any free fonts are used in the template, a link to the fonts will be supplied
Step 2: Add the Template to FCPX
- Organize the text template by placing it in the relevant category (Effects, Generators, Titles, Transitions). Download the freeLogo Reveal Pack if you wish to follow in the footsteps of the designers. This pack should be placed in the Generators folder.
Step 3: Start Using Your New Template
- Install the text template into the proper category on your website. (Effects, Generators, Titles, Transitions). Download the freeLogo Reveal Pack if you want to follow in their footsteps. In the Generators folder, you’ll find this bundle.
We hope that this lesson was useful in showing you how simple it is to add text in Final Cut Pro.
Adding some fancy and informative text to your projects is going to make them appear a whole lot more professional in no time. Good luck with your edits!