How to curve text in procreate with liquify?
- To curve text in Procreate with the liquify tool, make sure that all of your text layers are selected. Open the Adjustments tab and click on Liquify. Choose the Push option. Pull the ends of your text down and push the middle up. Keep doing this until you get the curve you’re looking for.
- 1 How do you make text curved?
- 2 What app can i use to curve text?
- 3 How do I offset text in Procreate?
- 4 How to Curve Text in Procreate (2 methods!)
- 5 Curve Text in Procreate Using the Liquify Tool
- 6 Curve Text in Procreate Using the Warp Tool
- 7 Curve Text in Procreate by Manually Adjusting Each Letter
- 8 How to Make Text Curve in Procreate: Letters in Style
- 9 Step-by-Step by Guide on How to Make Curved Text in Procreate
- 10 Border and Arched Text Techniques in Procreate
- 11 Bonus technique
- 12 How to Curve Text in Silhouette Studio
- 13 HOW TO CURVE TEXT IN SILHOUETTE STUDIO
- 14 Adding Text to Procreate Artwork with Inkpad
- 15 Procreate Tutorial: Lettering in a Circle
- 16 Curved Text
- 17 Ratings and Reviews
- 18 Information
- 19 Supports
- 20 App Update: How to Use Text in Procreate
- 21 Curve Text with Affinity Designer
- 22 Curve Text with Affinity Designer
- 23 Conclusion
- 24 Become A Master of Affinity Designer!
How do you make text curved?
Create curved or circular WordArt
- Go to Insert > WordArt.
- Pick the WordArt style you want.
- Type your text.
- Select the WordArt.
- Go to Shape Format > Text Effects > Transform and pick the effect you want.
What app can i use to curve text?
PicMonkey is one of the only design platforms out there with a super easy-to-use curved text tool. Check it:
- Tap the Text option from the bottom toolbar and type your message.
- Tap Done.
- Tap Curve and use the slider to adjust the curve of your arc.
How do I offset text in Procreate?
To create the offset, select your stroke layer and tap the move tool to select the layer contents. Tap the bottom right corner of your canvas 4-6 times to create the offset effect.
How to Curve Text in Procreate (2 methods!)
Procreate has a number of various techniques to curve text, and we’ll go over a couple of them in this article. We’ll begin with the easiest option and work our way up to the method that requires the most time and changes. Many excellent font duos and trioson Font Bundles are available, and we’ve picked the Helton font family as the one we’ll be using here. We will first import the font into Procreate, and then we will add our text to the document. For this tutorial, we used the phrase ‘Design Bundles.’
Curve Text in Procreate Using the Liquify Tool
The process of using Liquify to curve text is straightforward, but it might be difficult to predict precisely how much your text will curve and stretch. Please keep in mind that after you use the Liquify tool, the text will be rasterized. You will no longer be able to edit what the text says, so make a copy of the text layer beforehand if you need to make any changes.
Step 1 – Enable Liquify Tool
When the text layer is chosen in the Layers panel, click theAdjustmentsbutton and selectLiquify from the drop-down menu.
Step 2 – Adjust Liquify’s Push Brush Settings
The text layer in the Layers panel should be chosen; then, pick Liquify from the Adjustmentsbutton.
Step 3 – Push to Curve Text
The Liquify tool behaves similarly to a brush. Make a series of strokes in the direction you want the text to bend. Keep in mind that you are not painting the curve itself, but rather moving the pixels that are already in place to where you want them to be. It is not required, but it is beneficial, to turn on the Brush cursor in the Procreate options (ActionsPrefs). You will be able to see the contour of the brush while you are drawing if you have the Brush cursor enabled.
Curve Text in Procreate Using the Warp Tool
Withthe warp tool, you will have to make a lot of tiny modifications utilizing the warp mesh. Please keep in mind that after you use the Warp tool, the text will be rasterized once again. You will no longer be able to edit what the text says, so make a copy of the text layer beforehand if you need to make any changes.
Step 1 – Sketch Lines and Align Text
Make a decision on how you want to curve the text and draw some lines to serve as a guide. The drawing lines should be horizontally centered on the surface. In between the drawing lines, insert the text, making sure that the text is horizontally centered on the canvas.
Step 2 – Enable Warp Tool
After you’ve picked your text layer, use theTransformbutton. Next, select Warpin from the toolbar at the bottom of the screen and then hit Advanced Mesh.
Step 3 – Warp to Curve Text
Tap theTransformbutton while your text layer is chosen. In the next step, select Advanced Mesh from the Warpin toolbar at the bottom.
Curve Text in Procreate by Manually Adjusting Each Letter
Manually tweaking each letter to curve text is the most effective method of ensuring that the letters remain the same size throughout the text. When working with a script font, this approach should not be utilized. Please keep in mind that once you choose a letter and begin to move or rotate it, the text will get rasterized once more. You will no longer be able to edit what the text says, so make a copy of the text layer beforehand if you need to make any changes.
Step 1 – Sketch Guides and Align Text
Make a decision on how you want to curve the text and draw some lines to serve as a guide.
Horizontally center the lines on the canvas, then insert the text between the sketch lines, with the text horizontally centering on the canvas, as shown in the example.
Step 2 – Select Letters and Adjust Snapping Settings
TheSelectionsbutton is activated while the text layer is chosen in the Layers panel. Using the Freehand, Rectangle, or Ellipse drawing tools, choose a single letter by drawing a circle around it. We recommend that you begin with the letter that is closest to the middle of the alphabet. After that, click on theTransformbutton. Toggle offMagnetics andSnapping in the Transform toolbar by selectingSnapping from the Transform toolbar. We want to be able to move and rotate the letter as flexibly as possible.
Step 3 – Move and Rotate Letter
Move the letter to its new spot, following the lines drawn on the design. Depending on the situation, rotate the letter. Continue choosing, moving, and rotating the letters until you have completed the alphabet. Keep the spacing between the letters and between the words in mind. Tip: If you ever notice that your letters are overlapping, simply undo and repeat the process. Choose a letter from the drop-down menu. Then, using three fingers, swipe down on the canvas to reveal the CopyPaste menu option.
By doing so, you will prevent the letters from being overlapped on the same layer as one another.
How to Make Text Curve in Procreate: Letters in Style
Allow us to demonstrate how to make text curve in Procreate in order to create stylish quotes and calligraphy! Learn how to do it by watching our lesson right now! Dearest Procreate friends, please accept my greetings! To help you produce some gorgeous typographic quotations, I’ll show you how to obtain curved text like the one shown in this video.
Step-by-Step by Guide on How to Make Curved Text in Procreate
So, first and foremost, create a new layer and then navigate to the actions panel, where you will select add and then text. It is possible to enter in your text, something along the lines of “Dream Big,” and then come down here to the Double A. (Aa). Additionally, you have the option to change the size. So we’re going to raise the size of this, so make sure you’ve got all of the text chosen before continuing. This may be accomplished by double touching and then dragging this selector all the way across the screen.
Step 2: Change Color of Text and Adjust Kerning
We may also alter the color of the text. For the time being, I’m going to make this white. We need alter thekerning a little bit since we are going to be putting this curve in, so that there is a little bit more letter spacing between each of the letters. That’s all there is to it! That’s coming out extremely nicely.
Step 3: Duplicate Layer
This text is going to be rasterized, so we’re going to duplicate this layer and hide the original one, then press on that layer and select “rasterize.”
Step 4: Select Text LayerGo to Selection Tool
We’ll next pick the text layer once more and return to the selection tool, where we’ll create another square around the letter that comes next.
Step 5: Create New Layer and Select a Brush
The next step is to create a new layer and apply a regular brush to it. A tiny brush will suffice. Next, draw a circle around it and keep it in place while adding a finger to make the design absolutely flawless. This is going to serve as our road map.
You’ll need to make a copy of this and change it by tapping on the selection tool and bringing it down to uniform size, and then make it a little bit smaller, as shown. Then you may move it about until it is in the center of the other circle, which is where it should be. That’s all there is to it!
Step 6: Start Selecting LetterTap on Movement
Okay, the next step is to begin picking our letters, and we’ll begin with the letter D to get things started. Tap on the movement to make it happen. After that, you can move it around with your finger, and you can rotate it with the brush as well. It makes no difference where you begin at this point. It’s as simple as laying it on. Next, choose the R and drag it across the screen to rotate it, and we’ll repeat this process for the remaining letters.
Step 7: Remove Original Text and Take Off The Guides
You may then erase the original text and the guidelines, and you’ll have text that is arranged in an arc. (See illustration) If you want to, you may add some more details, and I might even add some shading if you like. And that’s how you make a curved typographic quotation, simple as that! I hope you found the video to be entertaining. Why not follow along for more tips, techniques, and tutorials, and have a wonderful day? Thanks for reading.
In this article, we’ll show you how to create curved text quickly and easily. It’s a fashionable method to make phrases and letterings! You may also be interested in our video on “Tips for Using Procreate With a Keyboard” if you enjoyed our tutorial on “How to Make Text Curve in Procreate: Letters in Style.” For a variety of articles, you may want to take a look at our other reads below.Procreate 5.2 3D Painting Features Revealed10 Best Procreate Texture Brush Packs (FreePremium Options)Top 10 Tik Tok UI Design Accounts You Should FollowHow to Make
Border and Arched Text Techniques in Procreate
In this article, we’ll show you how to create curved text quickly and easily. It’s a beautiful method to make phrases and letterings. You may also be interested in our video on “Tips for Using Procreate With a Keyboard” if you enjoyed our tutorial on “How to Make Text Curve in Procreate: Letters in Style.” For a variety of articles, you may want to take a look at our other reads below.Procreate 5.2 3D Painting Features Revealed10 Best Procreate Texture Brush Packs (FreePremium Options)Top 10 Tik Tok UI Design Accounts You Should FollowProcreate
- In this article, we’ll show you how to create curved text quickly and easily. This is a fashionable method to make quotes and letterings! You may also be interested in our video on “Tips for Using Procreate With a Keyboard” if you enjoyed our tutorial on “How to Make Text Curve in Procreate: Letters in Style.” For a variety of articles, you may want to take a look at our other reads below.Procreate 5.2 3D Painting Features Revealed10 Best Procreate Texture Brush Packs (FreePremium Options)Top 10 Tik Tok UI Design Accounts You Should Follow
Office supply stores should have labels in the aforementioned sizes and shapes available for purchase; they’ll also most likely have more shapes and sizes available as well. So, first and foremost, we’ll create a simple rectangle label with dimensions of W21 x H38mm. There is no restriction on the size you pick, and if you plan on printing onto paper and cutting the labels out, you may choose any sized rectangle and then scale it to fit your needs. To begin, open Procreate and create a new canvas with the proportions you wish by clicking the+ button in the upper right-hand corner.
- Set your DPI to 400, which will result in a printout of excellent quality.
- Select a backdrop color from thelayers menu by selecting it from the drop-down list.
- Create a new layer after that.
- Ideally, the brush size should be rather large; I’ve set mine to about 80 percent.
- In keeping with the motif of the backdrop color that you’ve chosen, choose a deeper shade of the same color.
- Use your water brush to stamp around the paper.
- Marble has extremely unequal veins, therefore increasing the size of our brush will make it appear more authentic.
This tool, if you haven’t used it before, is a lot of fun to use since it simply moves everything we have on the canvas around and creates a water-like appearance.
Remember that the more distortion you apply to your tool, the more water-like it will appear.
To add a new layer, go to thelayers menu and press the plus sign (+).
Stamp around the page with the lighter color in the same manner as you did with the darker color.
Return to yourliquifytool and reposition the white sections as desired.
Click on theribbontool, which is the third symbol from the left in the top-right corner.
Draw a rectangle on the page; it is not necessary for it to be even or in the middle at this time.
This should now display a grid across the bottom of your website.
Our task of creating an equally formed rectangle will be made easier thanks to the drawing guidance.
After you’ve dragged the rectangle to the center of your page, you can use the drawing guide to help you adjust the borders of the rectangle so that it’s evenly spaced.
We’ll now proceed to add text.
Create a new layer, and then go to the settings tool and type in some text.
Simple “handmade by” in dark grey is what I’m thinking about using.
Once you’ve created the text you want, you may arrange it wherever you like on the canvas.
Once again, you may arrange the elements on the canvas anyway you choose. Everything on your sticker is now complete! Print on labels or plain paper and cut to the appropriate size. If you would want a more in-depth instruction on how to create a marble look, please visit this page.
The method above may be customized to fit your individual preferences; for example, you can change up the typefaces or add solid colors to your border, or even use clip art. In the next part, I’ll demonstrate how to make curved text for circular labels using Adobe Illustrator. Although Procreate does not have its own vectors, like does Photoshop, there is a technique to get this effect with the program. I’ll start with a simple design for the purpose of demonstrating you how to achieve the curved text appearance in Photoshop.
- To draw a circle, all you need is an inking brush of any kind; I prefer to use monoline, which can be found in the calligraphy area.
- Don’t lift your stylus when drawing the circle.
- You should pick uniform with the pointertool and then decrease the circle slightly to create a border effect, as seen in the image.
- Text should be entered in the typeface and color of your choice.
- Having typed your preferred content, scale it so that it will fit inside our circular boundaries; it is also necessary to make sure that it all fits on a single line of text.
- Take note of the text on the left-hand side of your most central letter – for me, this is everything to the left of the letter “e” – and copy it.
- Take a second look at the freehandselectagain to find the following letter, which for me is “d.” Drag the next letter down until it is positioned on the innermost circle of the previous letter.
- For the most part, you want to spin your letter till the bottom is aligned with the inner circle line.
- Uncheck thethetick box on the layer containing the inner circle in yourlayers menu to make our “guide circle” invisible.
- You’ve completed your task!
- There are a plethora of possibilities for this project!
Below are a couple more possibilities, both are using clip art inserted as pictures in Procreate. The flowery one was produced by first creating a white rectangular box and placing the text inside it, and then altering the opacity of the rectangle.
How to Curve Text in Silhouette Studio
Create interesting and creative designs with text curves in Silhouette Studio by learning how to use the program. Silhouette Studio is a ton of fun to use and create designs with. I enjoy creating bespoke designs for a variety of different surfaces. When you want your text to curve around a form rather than being in a straight line, what occurs is that you have to use a curve. Curving text in Silhouette Studio is simple, and it offers up a plethora of creative possibilities for designing one-of-a-kind designs.
Let’s get this party started!
HOW TO CURVE TEXT IN SILHOUETTE STUDIO
When you curve text in Silhouette, you are essentially creating a route for the text to follow. That route may be any curved form, but for today’s example, I’ll be inserting text on the circumference of a circle. Use of a graphic that I produced for a previous post to demonstrate how to bend text around it will be used. Let’s wrap the phrase “You’re Sweet” around an ice cream cone to make it more visually appealing. If you would want to see how to build the ice cream cone in Silhouette Studio, you can find instructions on how to produce SVG files in this article.
First and foremost, you must type out your content. By selecting the letter “A” on the left-hand panel, you may also access the text. Fill in the blanks with your text and then select your font and size from the drop-down boxes at the top. I’m using the Bebas Neue typeface for this. Place your text above and below your artwork to make it stand out.
It is necessary to start by typing the content of your text. By selecting the letter “A” on the left-hand panel, you may also view the text. Text should be typed in, with font and size options available through drop-down choices at the top of the screen. This is the typeface Bebas Neue, which I’m currently working with. Put your text above and below your design to make it more readable.
Double-click on the text to make it larger. A green box will appear around the text as a result of this action. In the lower left-hand corner, there will be a black circle with cross-hairs. For the text to be curled around your circle, click on the black circle and drag it onto the top of the circle form that you just created. The text will follow the contour of the circle. Now, in the bottom of the circle, write the word “Sweet” in capital letters. Double-click the circle shape and drag the black circle on top of the circle shape to position text around the bottom of the circular shape.
To correct this, just drag the black circle to the outside of the circle form and use the slider to alter the spacing of the letters within the circle.
The text may be selected by double-clicking it. The text will be surrounded by a green box after you have done this. Towards the bottom left of the screen, there will be a black circle with cross-hairs. For the text to be curved around your circle, click on the black circle and drag it onto the top of the circle form that you just generated. The text will curl around the circle while it is being read out loud. Then, along the bottom of the circle, write the word “Sweet.” Double-click the circular form and drag the black circle on top of it to position words around the bottom of the circle.
Your text may appear something like this once you’ve done so: (see below). To correct this, just drag the black circle outside of the circular form and use the slider to alter the space between the letters.
MORE SILHOUETTE TUTORIALS
- Welding in Silhouette
- Using Silhouette Sketch Pens
- How to Weld in Silhouette In this tutorial, you will learn how to create SVG files in Silhouette Studio. The best fonts for the Silhouette and Cricut machines
ARE YOU IN LOVE WITH IT? PIN IT FOR LATER!
Adding Text to Procreate Artwork with Inkpad
Combining Procreate artwork with vector drawings results in some very amazing designs with virtually endless possibilities. In this video, I’ll demonstrate several different methods for adding text to Procreate artwork. First and foremost, I already have a simple piece of artwork completed in Procreate and ready to go. I’m going to send my artwork as a PNG file using Dropbox, but you may also utilize picture stream or simply copy it across to your computer system. I’m going to head over to Inkpad and import my artwork using Dropbox, which is quite similar to utilizing the camera roll on my phone.
- So, here is my new sketch, complete with my artwork ready to be added as a new layer in Photoshop.
- In order to create a cut out text effect, I’m going to start by drawing a white circle up the center of my painting to fill in the hole in the middle of my painting.
- Now, let’s get to the meat of the matter.
- After creating a new layer using the Text tool and pasting in my text, I will change the Fill color back to white.
- Now that I’m satisfied, I’ll duplicate my text layer.
- Selecting my visible text layer, I will use the Create Outlines from Text command from the Path menu to create outlines for the text I have selected and locked.
- Inkpad vectors may also be imported into Procreate if you want to take use of the wizardry even further.
I just so happen to have a really friendly Octopus looking for a wonderful underwater home over in Procreate, and I thought you might be interested.
Once Mr Octopus has been successfully replicated, I’ll send him to Procreate, where he’ll find his new home waiting for him there.
Next, by sliding three fingers down the screen, pick paste, and’sploosh’ there he is, clearly pleased with his new underwater home.
The blue splodge of paint in another Procreate artwork is a bit of a mess, I think.
I’m going to use the Text Tool to generate two lines of text that are independent from one another.
Because I’m using an aquatic motif, I’d want some undulating writing to go along with that.
To get rid of that obnoxious black fill, I’ll toggle it off.
Now that I have my first line of text selected, I will choose my blue splodgy backdrop and, this time, I will utilize the Mask option from the Path Menu.
As a result, I’ll use the Freehand Tool to make a second wavy line for my text, which I’ll take off the fill, which was accidentally set back on when I chose my text.
That appears to be satisfactory, and I can now move to the Multi Selection Tool and choose my text before using the Place Text on Path command.
Although it was pasted directly in front of my content, it has to be placed behind it in order to function as a mask in the program.
Still using the Multi Selection Tool, I’ll reselect all of the text in the document and select Create Mask from the Path Menu.
I can choose Paste from the three-finger swipe menu in Procreate, and my text will appear.
Because I can manipulate its size, position, and layering, I can make sure it isn’t concealed under that annoying seaweed. This is how text looks in Procreate. Seaweed brushes for Procreate from Uproot are available here. Ringo Star composed the song Octopus’s Garden.
Procreate Tutorial: Lettering in a Circle
This post, as well as the images contained within it, contains affiliate links. If you make a purchase after clicking on the link, I may get a small compensation at no additional cost to you. Please see our complete disclosuresHERE. The Lettering in a Circle tutorial for Procreate. Learn how to use the Circle Grid Stamp from my Celestial Brush Bundle to make this hand-lettered artwork by watching the video tutorial below. Basic lettering within a form is an excellent method to add personality to your work while remaining simple.
Because we covered so much ground in the prior two films, this one will be a little shorter.
- Aim toward the Moon and the Stars Procreate Video Lesson
- Lettering on Photos Procreate Video Lesson (shown below)
- Procreate Video Lesson (shown below)
Today’s project will be “Let’s go stargazing together,” and we’ll be working on it.
Here’s What You’ll Need for this Video Lesson
- IPad with Apple Pencil capabilities
- Procreate app
- Celestial Lettering Brushes
- IPad Pro with Apple Pencil capabilities
- Watercolor Paper (included in the brush download)
- Celestial Block Brush
- Circle Grid Stamp
- Star 1 Stamp
- Celestial Block Brush (included in the brush download)
Procreate Tutorial: Lettering in a Circle Video
In this brief video tutorial, I’ll guide you through the process of utilizing the Circle Grid Stamp as a foundation for your writing. Take a look at the video below! Additionally, this film is available to view on my YouTube channel.
30 Days of Celestial Brush Calligraphy
Loving the cosmic theme? Take a look at my 5-star rated Celestial Brush Calligraphy Workbook for more information. Choose between printing and practicing on paper, or downloading and practicing on your iPad Calligraphy! –
iPad Lettering 101: How to Use Procreate
More Procreate tutorials and practice sheets may be found on myiPad Lettering 101’s website dedicated to lettering. Good luck with your creations!
Continue reading on myiPad Lettering 101’s page for more Procreate tutorials and practice sheets! Best of luck with your work.
It enables you to add gorgeous curved lettering to your photos with ease. The numerous curve forms, text styles, artistic fonts, and backdrop templates available allow you to create one-of-a-kind messages in ways you never thought. With the help of a capable photo editor, you can also add effects, frames, and stickers to your photos. Beautiful curve shapes—draw them for free • Wave • Arc • Bell • Horizontal/Vertical Line • Semi Circle • Circle • Rectangle • Rectangle The ability to create a bespoke curve with your finger touch The ability to have an unlimited amount of messages – not just one text!
Tons of backdrop designs, all designed for Instagram.
That is the point. It’s really incredible!” Version 1.12.2 is available.
Ratings and Reviews
The way this is now set up might be much improved. It is not possible to resize or alter objects using two fingers. According to the user, the “create your own line” functionality is not functioning properly. Was searching for something quick and was not interested in digging in and learning something new. It’s possible to get a lot more for your $2.
Export is not working
Every time I export a photo, the shot is saved without any caption, making this program appear to be completely ineffective.
Not worth $2.99
Every time I export a photo, the shot is saved without any caption, making this software appear to be completely ineffective to me.
No Details Provided
When the developer submits their next app update, they will be obliged to include information about privacy practices.
Seller Dimensions79.1 MBCompatibility MobiLab Co., Ltd. iPhone It is necessary to have iOS 11.0 or later. iPad iPadOS 11.0 or later is required for this feature. iPod touch is a portable media player that allows you to listen to music on the go. It is necessary to have iOS 11.0 or later. Languages The languages are English, Japanese, Korean, and Simplified Chinese Rating for those above the age of four MobiLab retains ownership of the intellectual property and reserves all rights. In-App Purchases are available for $2.99.
Hello there, buddies! The fact that I’m going to teach you not one, but two different ways to outline your text AND letters in Procreate makes me extremely happy. This outline bundle was something I didn’t realize I needed until I came across it on DesignCuts and knew I had to get it right then and there. When it comes to adding that additional pop to my lettering in Procreate, this bundle makes my life a whole lot less complicated. When it comes to adding different shadows to my letters, I generally aim for a handcrafted approach, but there are times when I just need something else to do it for me.
Watch the video below to discover how it works in real life.
I’m very pumped to get in and demonstrate to you all just how much you require it as well, so let’s get started!
- IPad cover (my favorites from 2015-2018)
- The Procreate outline brushes for the Procreate bundle are included in this package.
What I love aboutthis outlining packfor my lettering includes:
In Procreate, using this outline pack is a quick and easy method to go around the system. There are those days when you really want your lettering to have that genuine drop shadow look to it. But, to be honest, there are other days when I just want a quick fix! If you’ve been a member of this community for a long, you’re probably aware that I enjoy a good shortcut. This is being screamed from the top of a mountain. THIS. PACKAGE. IS. THE. ONE. All of these brushes behave in a different way, some with pressure, others without, and there are many other possibilities available.
Another feature of this outline pack that I particularly like is that it automatically blends the outline elements together rather than having them overlap.
Here’s a clearer illustration of what I mean when I say that the contour integrates the writing rather than overlapping it.
Pro tip: If you discover that you’re utilizing colors and one of them is coming out more dull before applying pressure, it’s likely that you’re experiencing pressure tilt.
Here’s an easy workaround for your problem: Select “modify pressure curve” from the wrench tool’s drop-down menu and alter the pressure curve to be at an extremely acute angle (as illustrated above!).
In this outline bundle, you get three things in one, which I really like and appreciate! The all-in-one, the color outline, and the classic outline are three different types of packs that all work in the same way but have somewhat different functions. What I appreciate about content packs with this much variety is that there is a brush for every sort of artist, and then some more! Pro tip: For this pack, you should adjust your streamlining setup a little. Make sure you have both brushes on the upper left turned up to the maximum streamline setting!
- And that’s the end of it!
- Some of them have various pressure sensors or have more weight on one side than the other, and some of them have colors while others don’t have any.
- Unfortunately for me, I truly liked all of them, and it’s now quite difficult to decide which ones to use and when.
- I hope you enjoyed this tutorial, and if you are interested in purchasing this pack (which you should!
- Alternatively, click on the huge obnoxious button below.
- Do you want to bookmark this for later?
App Update: How to Use Text in Procreate
Procreate, widely regarded as the go-to tool for illustration and design by the creative community, has made significant gains since its first introduction in 2010. This helpful tool closely mirrors the structure of Adobe Photoshop with respect to its brush library, layer modes, tweaks, and raster profile, making it an illustrator’s greatest buddy. It was previously lacking text editing capabilities, despite the fact that the digital program is unquestionably in a class of its own. Typography still remains a big component of design and illustration, thus users continued to advocate for a text addition to the app.
Read on to understand the ins and outs of Procreate’s new text tool and uncover two tutorials that teach you how to employ typography in your next project.
Procreate Text Tool Features
The text tool is everything that Procreate users have been waiting for. It is simple, yet powerful. Instead of having to switch between various apps or exporting the file and altering it afterwards, Procreate now has text-editing capabilities built right within the application. To add text to your canvas, hover your cursor over the wrench symbol and selectAddAdd Text from the menu. This will bring up a text box where you can swiftly put out letters or a sentence using the keyboard to complete the task.
Once you’ve finished typing a sentence, click on the Edit Stylebutton located on the keyboard. This brings up the text editing menu, where you may make changes to the font, style, design, and other aspects of the document. However, you may also import fonts from other sources into Procreate’s Fontsection, which has a library of basic typefaces. Italic and Semibold font styles are available under theStylesection, and you may select them based on the font you’ve selected. In theDesignsection, you can change the font size by dragging the slider, and you may edit the spacing between letterforms by using the Kerning, Tracking, and Leadingsliders.
Using theOpacityslider, you may control how transparent the text layer is.
In the first section, you may choose whether or not the text layer should be flush left, center, flush right, or justified.
When you are in text editing mode, you may change the color of your text layer by clicking on the colored circle at the upper right of the application.
Within the Disc, Classic, Value, and Palettestabs, you may choose from an infinite number of colors. Once you’ve finished making all of the changes to your text layer, click Done to return to the main canvas.
In addition to using the library of preset fonts that Procreate provides, you may import font files from third-party sources such as Google Fonts, Dafont, Font Squirrel, and other similar sites to your project. Importing fonts into the Procreate app may be accomplished in two ways: by AirDropping existing fonts from your computer to your iPad and then importing them into Procreate, or by downloading fonts straight from your iPad to the Procreate app. Importing Data Using AirDrop If you have a large font collection on your computer, like I do, you may find that the AirDrop option is the most convenient for you to work with.
- Open the OTF or.TTF file and choose ShareAirDrop.
- There will be a popup box asking where you want to save the AirDrop file; selectProcreate to save the font file straight to your program.
- Importing Directly From an iPad is possible.
- To get started, locate a typeface on any website and click on the “download” button.
- At the upper right of the screen, selectAdd and then clickPreview Content.
- SelectCopy to Procreate from the Sharebutton (square with an upward arrow) on the right side of the screen.
It is possible to alter the text layer in addition to typing out string after string of text. Go to theLayerspanel and choose the text layer’s thumbnail by clicking on it. SelectRasterizeto convert your typography into a raster object that can be edited; this command provides you with more text manipulation options, such asLiquify and Gaussian Blur. TheAdjustmentcommands in Procreate may be accessed by clicking on themagic wand icon. Noise and Liquify are two effects that are very effective when used with typography.
Tap the screen with two fingers to undo any effects that have been applied.
Using the Text Tool in Your Designs
Having learnt how to utilize the text tool in Photoshop, let’s have a look at how to add typography into your illustrations in Procreate. One of my favorite techniques for accomplishing this is to use drop shadows to bring two-dimensional text to life, as well as interweaving text across a backdrop artwork.
Make a 3D Typographic Composition
Single-layer text on a background might seem uninspired and uninteresting when done in a single color or font. It is possible to immediately raise a previously flat design by incorporating depth and shadows into it. Starting with a phrase or letter, duplicate the layer by swiping left and selectingDuplicate from the drop-down menu. Drag the copied layer beneath the original text in theLayerspanel, then offset the bottom layer with the cursor icon to make it appear to be a different color. The bottom layer should be moved down and either to the right or left of the top text layer in order to imitate a drop shadow.
- After that, select theBrush Tool and click on it.
- Adjust the brush size on the left-hand side of the screen, and then connect the bottom text layer to the top text layer as seen in the image below.
- Apply a drop shadow to all letterforms using the monoline brush, then rinse and repeat until all letterforms have a drop shadow applied.
- Make your way up to theColor Tool (the circle in the upper right corner) and choose theDiscsection.
- It will be possible to add depth to the drop shadowed text by using darker (or lighter) color palettes.
- When the checkerboard grid option is selected, a grey checkerboard grid will appear on the thumbnail.
- Draw within the Alpha Locked layer using theBrush Toolset set toMonoline to create the illusion of depth.
Find an imagined point of light and use it to fill in the rest of the form. The darker hue should be allocated to areas of the image that are further away from the point of light, while the brighter hue should be assigned to portions of the image that are closer to the point of light.
Intertwine Text Throughout Illustrations
Typography may be used in a variety of ways in a composition, and one of the most interesting is to weave the text throughout an artwork. Instead of merely sitting on top of a composition, this allows the typography to interact with all of its constituent parts. Begin by sketching out the pieces of your backdrop. These can be made out of forms, blobs, plants, or any other decorative elements that you like. Make careful to use layers to isolate your illustrations from one another. For assistance with navigating the Procreate program, please see this comprehensive tutorial.
- I used a hefty sans serif, such as Futura Bold, to contrast the delicate and precise leaves on the table.
- Drag the bottom text layer below an illustration layer and click the visibility checkbox on the top layer to see how the text interacts with the illustration in a preview window.
- Turn on the visibility of the upper text layer by clicking on its thumbnail and selectingMask.
- Look for shapes or pictures that overlap the text, especially on the layer behind the text, and use them to enhance the text.
- Instead of using the masking options on the entire phrase, utilize them on a select letterforms to give your composition that layered appearance.
- Twin Design provided the mockup picture.
- Contact us today.
- Complete Instructions for Using the Procreate App
- 5 Techniques for Improving the Quality of Simple Procreate Illustrations
- In this tutorial, you will learn how to design a seamless pattern using the Procreate app.
Curve Text with Affinity Designer
To demonstrate how to curve text in Affinity Designer, I’ll show you how to wrap your text around a circle or set it on any other route in this lesson. Knowing how to accomplish this can help you improve your ability to create logos, emblems, and badges in the future. And, owing to the Artistic Texttool in Affinity Designer, this type of work can be completed in a pretty short amount of time. It is extremely similar (in function) to the procedure you would use to wrap text around a circle in Adobe Illustrator, and it is very simple to do so with Affinity Designer.
There are several ways to insert text on a route in Affinity Designer, and the following section provides a textual summary of each method.
You may, on the other hand, decide that a video instruction is more appropriate for this type of course. If this is the case for you, then please see the video instruction below, in which I guide you through each of the stages outlined below.
Curve Text with Affinity Designer
Using Affinity Designer, you may curve text by selecting the route that you’d want the text to flow along, then selecting the Artistic Texttool and clicking on the path to add your text. Alternatively, you can use the Text Tool to curve text. In this tutorial, I’ll be using Affinity Designer to wrap the text around a circle as the backdrop. This strategy, on the other hand, is the same as it would be with any other path. Using Affinity Designer, I will demonstrate how to wrap text around a circle in this lesson.
If you do not pick your path, you will not be able to insert text along the route.
Place Your Text On A Path
Using Affinity Designer, you may curve text by selecting the route that you’d want the text to flow along, then selecting the Artistic Texttool and clicking on the path to add your text. Alternatively, you can use the Text Tool to curve text in Photoshop. In this tutorial, I’ll be using Affinity Designer to wrap the text around a circular shape. This technique, on the other hand, is identical to any other way. Using Affinity Designer, I’ll demonstrate how to wrap text around a circle for this lesson.
Text cannot be placed along a path if it is not chosen in the path selection box.
Adjusting The Font, Size and Color
You may now customize the look with your own personal touches. Simply triple-click the text to select it, and then use the font and size options in the toolbar directly above the artboard to customize your text appearance. After you’ve picked your text, you may proceed to apply the font, color, and size of your choosing. You may also alter the color of your screen by selecting it from theColormenu on the right side of your screen.
Place Text On The Inside Of The Path
When you first curve text in Affinity Designer, the text will be put either on the inside or outside of the path, depending on which direction you choose. This is totally dependent on where you clicked on the route in the first place to begin with. You may insert your text along the inside of the path by selecting it and then clicking theReverse Text Pathbutton in the toolbar at the top of the screen after it has been added. When you click on theReverse Text Pathbutton, you can choose whether the text should flow on the inside or outside of your route.
This also works in the other direction.
It is simple to switch back and forth between them by continually pressing the button on the remote control.
Change The Position Of The Text On The Path
Changing the location of the text as it pertains to the route itself will be discussed later in this section. After you’ve wrapped your text around the route, you’ll see that two handles emerge — a green handle and a red handle — that you may use to guide your text along the path. They’re both triangle-shaped. Text begins in the location dictated by the green handle, and it may be manually moved as follows: Changing the position of the green handle allows you to identify where the beginning point of your text is with respect to the path.
So, for example, if you want to center your text in the top half of the circle, all you have to do is snap the green hand to the left side, the red handle to the right side, and then use the Centeralignment option at the top of the interface to center your text.
With the handles on the left and right sides, you may center your text on top of the circle by dragging them to certain positions.
Change The Text Baseline
When you curve text in Affinity Designer, you may observe that the base of the text corresponds to the point on the route where the text will be shown. Changing the value of the Baselineinput in the toolbar above the artboard may be used to modify the width of the baseline. Just above the workspace, you’ll find the baseline input, which is accessible in the toolbar. By using the slider, you may manually modify the baseline such that the text is aligned with the path’s outer edge but relative to the text’s top rather than bottom edge: The ability to control which section of the text makes touch with the path is made possible by adjusting the baseline of the text.
Change The Spacing Between Letters
While creating a curve with text in Affinity Designer, you may notice that when you place text on a route, the text will be placed at the base of the curve. This is called the base of the text. Changing the value of the Baselineinput in the toolbar above the artboard may be used to modify the width of the baseline in pixels. Just above the workspace, you’ll find the baseline input, which is accessible via the toolbar. The slider may be used to manually modify the baseline so that the text is positioned on the outside of the path, but relative to the top of the text rather than the bottom of the text: The ability to control which section of the text makes touch with the path is made possible by adjusting the baseline of the document.
At the top of the page, you’ll see a button that allows you to convert your text to curves. Click this button after you’re through with your text. Converting your text to curves will bring it to a close. Changing the text from a text object to a vector path (or “curve,” as they are frequently referred as) can do this. Especially if you intend to update the vector document with another program at a later time, this step may be essential. Unfortunately, it is not yet feasible to maintain the editability of the text across many platforms.
All changes will be final, so be certain that you are pleased with the text styling before proceeding.
At the top of the page, you’ll see a button that allows you to convert your text to curves. Click this button when you’re through editing your text. Your text will be completed after it has been converted to curves. In this case, the text will be transformed from a text object to a vector route (or curve, as they are frequently referred as). If you intend to update the vector document with another program at a later time, you may need to undertake this step as well. In the current state of affairs, it is not viable to maintain text editability across many platforms.
Before proceeding, double-check that you are pleased with the text styling before proceeding. Alternatively, you may save two copies of the design: one with the text editable and one without it, and then combine them.
Become A Master of Affinity Designer!
Would you want to know more about how Affinity Designer operates? Consider taking a look at myAffinity Designer Master Class, which is a complete series of over 60 videos in which I go over every tool, feature, and function in detail, explaining what it is, how it works, and why it is helpful. Sign up for our newsletter to get the latest news and updates. Logos By Nick is a participant in the Amazon Services LLC Associates Program, an affiliate marketing program designed to provide a means for website owners to earn advertising fees by placing links on their websites that direct traffic to Amazon.com.
You may find more information about affiliate disclosure here.